SvanzenASH MOCHA BROWN
This is a catalogued product
Duro Nature's SignatureKohinoor Of Veneer Duro Natures SignatureVeneerFinish · ASH MOCHA BROWN
Tight lengthwise lines enclose small, nested pointed arches.
What the catalogue says
Updated Aug 2026
- Catalogue
- Kohinoor Of Veneer Duro Natures Signature
- Series
- DYED
- Material
- natural veneer
- Finish on the plate
- ASH MOCHA BROWN
- Colours read off the plate
- None on the plate
- Thickness (mm) — less than 4.0mm
- Specified Value: ±10%; Results: Complies
- Thickness (mm) — Above 4.0mm
- Specified Value: ±5%; Results: Complies
- Moisture Content
- Specified Value: 5-15%; Results: 7.0-9.0
- Water Resistance
- Specified Value: Shall not show delamination; Results: Complies
- Length
- 2150,2440 &3050 mm
- Width
- 915 & 1220 mm
- Thickness
- 4 mm & above
- Veneer Face
- 0.5mm minimum
- Backing Variants
- Plywood (Gurjan/MHW): 4 mm; MDF: 6.0-25.0 mm; Flex Backing: 0.5 mm
- Product Density
- Plywood (Gurjan/MHW): 620; MDF: 680; Kraft: 1250; Flex Backing: 550 Kgs/cubic meters/typical values
- Surface Texture
- Natural; Open Grained; Distressed
- Range Available
- Dyed; Natural; Burls; Metallo; Fumed; Mystic; Designer
- Suggested Finishing - Natural/Fumed
- PU, Polyester and Water Based Acrylic
- Suggested Finishing - Dyed
- Water Based Acrylic or PU with Non Yellowing component
- Cuts Available
- Crown Cut; Quarter Cut; Rift Cut; Rotary Cut
- Veneer Matching
- Book Matching; Shuffle Matching; Slip Matching; Reverse Slip Matching
- Borer & Termite Resistance
- Product exhibit is defined resistance
- Bonding Adhesive
- In-house Formulation
- Emissions
- EN 717-1
- Bonding strength of adhesive
- ANSI
- Resistance to colour change
- Change owing to nature of wood are observed over a period of time and exposure to light
- Abrasion Cycles
- ASTM 4060 S32; 1000 CYCLES
- Visualisation
- Not generated